Beyonwiz FV-L1 - Manual (Page 57)

STB & PVR Function
50
3-3. Timer
You can set the FV-L1 to automatically record programs by setting
timers. The timer function can also be used to automatically change
service in order to view an important program, or to transmit the
picture to an external recording device such as a VCR (Video Cassette
Recorder). There are two methods of creating timers, as follows;
 via Timer List: requires the recording details to be individually set.

via EPG (Electronic Program Guide): sets the recording details
automatically.
This section explains the Timer List method. The EPG method will be
explained in the “EPG (Electronic Program Guide)” section later in this
chapter.
1) View Timer List
The timer list is used to view a list of all the timers you have created.
To view the timer list, press the POP-UP button, and then press OK.
To close the timer list, press EXIT.
NOTE
 The timers are arranged by the start date and time.
 A timer is shown in dark grey if it is currently active (i.e. recording).

You can set a maximum of 100 timers.