Barco DICOM THEATER MGP 15 - Manual (Page 97)

Driver re-installation, updates or removal
97
Driver re-installation, updates or removal
Reinstalling or updating your BarcoMed 2MP2CP driver
Note: These instructions apply to Windows 2000 and Windows
XP.
Important for Windows 2000 or Windows XP users only: If you
previously uninstalled the driver, do not allow the Windows Plug
and Play software to reinstall the driver for you.
To reinstall or update only the BarcoMed 2MP2CP driver, follow
the steps described in the section “Using the BarcoMed Product
Installation Wizard” with the following changes.
1. Boot your system, and log in using an account with
administrator privileges.
2. Insert your Dicom Theater Software CD into your computer’s
CD drive. If the “BarcoMed Product Installation Wizard”
doesn’t start within one minute, browse the contents of your
Dicom Theater Software CD and double click on the file:
“Setup.exe” to start the wizard.
The wizard will begin by displaying the screen shown in
figure 37 below.
Figure 37