Bissell 3750 SERIES-220-240V EN - Manual (Page 13)

13
w w w . b i s s e l l . c o m
TurboBrush maintenance
Select Models only
the turbobrush should be checked
regularly for clogs or debris
wrapping around the brush roll.
Unplug vacuum from electrical outlet.
If a clog is present or debris is visible, unscrew
the two screws on the back of the TurboBrush to
remove the faceplate and clear any obstructions.
To clean debris from the brush roll, remove the
screw located on the belt cover. Lift the belt
cover. Remove the brush roll from the drive belt
and clean debris.
Reposition the drive belt on the brush roll. Place
ends of brush roll in slots on sides as shown.
Reposition belt cover and secure with shorter
screw. Reposition faceplate and secure with two
longer screws.
M
aintenance and care
Belt Cover