Bissell 3750 SERIES-220-240V EN - Manual (Page 8)

8
w w w . b i s s e l l . c o m
Special tools
your bISSEll lift-off is not only a powerful floor
vacuum cleaner, it’s also a versatile stairs and above
floor vacuum when you select one of the special tools.
notE: the tools can be used with the
vacuum in the upright position or with the
detachable cylinder.
1. Detach the vacuum hose by grasping the hose grip
and lifting to separate from the hose grip base.
2. Attach tools by firmly pushing onto vacuum
hose or telescoping extension wand.
combination dusting brush/upholstery tool:
Two types of cleaning tools are included in
one attachment; rotate for desired tool.
■ Use brush side to dust furniture, blinds,
books, lamps, shelves and baseboards.
■ Use upholstery side for curtains,
draperies, cushions and fabrics.
crevice tool:
Use in tight narrow spaces.
Stair cleaning tool: (select models)
Use for stairs, area rugs and other small carpeted
areas. This tool can also be used for bare floors.
note: the stair cleaning tool does not store
on board.
telescoping extension wand:
Use with desired attachment for a longer
reach. To extend the wand, twist the collar to
“Unlock” position and push away from you.
Twist the collar to the “Lock” position to lock
into place. To retract, twist to unlock, pull
toward you and twist to relock.
turbobrush ™ (Select Models):
Use rotating brush action for small areas
such as stairs and upholstery.
note: press gently when using turbobrush to
gain maximum cleaning. too much pressure
could cause the brush to stop rotating.
Deluxe bare floor tool (Select Models):
Use for bare floors. Swivel head turns to get
into tight spaces and fits under cabinets.
note: the deluxe bare floor tool does not
store on board.
all items may not be included with your model. More
tools are available; to order please refer to page 15.
O
peration
7
caUtIon:
always place vacuum
cleaner on floor in its fully
upright position and make
sure it is locked into place
before removing cylinder or
when using tools. placing
the lift-off in its full upright
position automatically stops
the rotating brush.