Aintenance and care, Cleaning clogs – Bissell 3750 SERIES-220-240V EN User Manual
Page 14
14
w w w . b i s s e l l . c o m
Cleaning clogs
low suction or poor pickup may be due to a clog
in the vacuum cleaner. If you notice a change
in the sound of the motor or a reduction in the
spinning action, check for clogs.
1. Unplug cleaner from electrical outlet.
2. Empty dirt container.
3. Check upper tank for build up or clogs.
4. Remove the upper tank and check the
suction inlet for a clog.
5. Grasp the hose grip and lift to separate from
the suction opening. Check for a clog in the
base or the hose.
6. Release the hose from the vacuum by
turning to the left. Straighten the hose and
unclog with a long, narrow object.
7. If the clog persists, follow the instructions for
checking the rotating brush on page 12 and
inspect the air passageway for obstructions.
M
aintenance and care