Philips PerfectCare Pure Centrale vapeur User Manual

Page 9

Advertising
background image

4

Press and hold the steam trigger to start ironing. Keep the steam

trigger pressed continuously when you move the iron over the fabric.

Note: When you use the appliance for the first time or after replacement of

the ANTI-CALC cartridge, it may take 10 seconds for steam to come out of

the appliance.
Note: The steam generator is equipped with a pump to guarantee a powerful

steam performance. The pump is activated each time you press the steam trigger.

It produces a loud pumping sound when there is no water in the water tank.
steam boost function

- Use the steam boost function to remove stubborn creases. Press the

steam trigger twice quickly.

Vertical steam ironing

Hot steam is emitted from the iron. Never attempt to remove creases

from a garment that someone is wearing. Do not apply steam near your

or someone else’s hand.

You can use the steam iron in vertical position to remove wrinkles from

hanging fabrics.

1

Hold the iron in vertical position, press the steam trigger and touch

the garment lightly with the soleplate.

Putting down the iron during ironing

- During ironing, you can place the iron either on the iron platform

or horizontally on the ironing board. Thanks to the OptimalTemp

technology, the soleplate will not damage the ironing board cover.

Energy saving

ECo mode

By using the ECO mode (reduced amount of steam), you can save energy

without compromising on the ironing result.

ENGLIsh

9

Advertising
This manual is related to the following products: