BSi PCATX-R9 - Manual (Page 13)

13 PCATX-R9 User’s Guide
Chapter 3
Using Your Workstation
Before you turn on your system, observing the following steps will prevent any
start-up problems.
w If you don’t have an auto-sensing power supply make sure the input
voltage selector switch on the power supply is set correctly to either
115V or 230V depending on your local outlet voltage.
w Heat generated by PCATX-R9 internal components is removed by fans
working in a push-pull fashion. A filtered intake fan and two drive bay
fans are located on the right-hand side of the chassis to draw air into the
chassis. On the left-hand side, the power supply has a built-in exhaust
fan. Leave enough space around your workstation to allow adequate
airflow through the system.
Starting Your System
Your PCATX-R9 is a self-contained portable computer with a flat panel LCD
and a detachable keyboard. The keyboard is securely attached to the chassis
by two latches. To start your system, follow these steps:
1. Set your workstation down on a flat and stable surface so you can
detach and lay down the keyboard.
Using Y
our W
orkstation