BSi PCATX-R9 - Manual (Page 14)

14 PCATX-R9 User’s Guide
2. Face the front of the chassis. Remove the keyboard by sliding the re-
lease latches up and pulling the keyboard away from the chassis as
shown in Figure 2.3.
3. The keyboard/pointing device cable should be already connected to their
sockets on the left side of the chassis. Remove the left side cover to
confirm; otherwise align the notches on the keyboard and pointing
device connectors to their respective sockets and firmly push them into
place.
4. Plug in the AC power cord. You are now ready to turn on your system.
5. Press the AC power ON/OFF switch to the ON position and then press
the front power ON/OFF button to start your system. If an operating
system is already installed, your workstation should boot to the operating
system’s start-up screen.
Figure 2.6
Power ON/OFF push-button switch.
Using Y
our W
orkstation
Power ON/OFF