BSi PCATX-R9 - Manual (Page 30)

30 PCATX-R9 User’s Guide
Installing 3.5” Drive In The Hidden Drive Bay
Your workstation provides an internal drive bay space for a 3.5” drive. This
drive is externally inaccessible.
To install a drive in the hidden drive bay, you must first remove all 5.25”
drives. You mount the drive using mounting screw holes on the bottom of the
drive to attach it to the drive housing. Figure 3.7 and 3.8 illustrate how to
install a 3.5” drive in the hidden bay.
Figure 3.7
Location of the hidden drive bay.
mounting holes
mounting holes
Adding Components