Bay Technical Associates 529H - Manual (Page 41)

36
To return to the verbose mode, enter the multiport Control-T (or
current control character) followed by ASCII capital J. If no other
changes are needed, you may begin operations with your multiport
controller.
!  

Since there are no adjustments and no moving parts in a multiport,
preventive maintenance is unnecessary.
!






If you find it necessary to return your multiport to the factory for
warranty work or factory-set changes, follow the procedure listed
under
Section 7.2 for repacking.
Before you ship your unit, please call BayTech to get a Return
Authorization Number. BayTech cannot accept warranty or no-charge
returns without this number.
!  
  
If you need to repack your unit for shipping, please choose a heavy
cardboard box for packing. Surround your unit with sufficient
insulation (a minimum of 2-inches) to withstand the rigors of transport.
Be sure to seal the box securely with strapping or packing tape.
Masking tape or cellophane tape is not recommended.