Bay Technical Associates 529H - Manual (Page 57)

TRAN-X high speed parallel/serial converter products allow you to
extend parallel cables to 1000+ feet and allow your network server,
graphics workstation, or PC to send/receive data at speeds up to
46,000 characters per second. You can use the Tran-x Series with
BayTech Model 24SII, LaserShare, or network print servers for the
fastest long distance peripheral sharing solution available anywhere.
Modular cabling provides simplicity in connections between remote
devices. Tran-x LPT-460 card plugs directly into your PC expansion
slot. Tran-x PS-02 connects to your PC's parallel port. Tran-x SP-01
connects to the Centronics connector of a parallel printer. Tran-x SP-
02 connects to the DB-25 parallel port of the BayTech 700 Series
Print Master, 800 Series Print Master II, or Model 24/24SII DES
peripheral sharing units.
"500H" Series, Model 24SII DAC, and Model 16M DAC Data
Acquisition and Control units connect between one host computer
and multiple peripheral devices. These models are often used in
industrial process-control environments (e.g., for allowing control of
multiple numerical or assembly-line machines), in exchanging data
between point-of-sale devices, or for operating a number of laboratory
instruments or business machines from a central computer. They are
especially effective in adapting small low-cost personal computers to
these applications. Each unit features six modes of operation which
may be easily configured to your application. The 500H series
models are available with either 5 or 9 ports. The Model 24SII DAC
unit is expandable from 4 to 24 ports and the Model 16M DAC unit is
expandable from 4 to 60 ports in 4-port modular increments.
Telplex Models TX102, TX104 and TX108 are asynchronous
statistical multiplexers which multiplex and demultiplex two, four, or
eight communications channels over a single channel. This single
channel is typically a telephone line or cable. The TX24 and TX16M
are expandable by four port slide-in modules. Programmable features
include serial port parameters (baud rate, word size, etc.), data flow
control, user-programmable strings to be sent to an external modem,
and remote diagnostics and configuration capability. These units
must be purchased in pairs.