Editing: basic operation, Choose what you’re going to edit, Select an item exit the settings edit the values – Boss Audio Systems GT-100 User Manual
Page 12
12
Quick Guide
Choose what you’re going to edit
Press one of the following buttons .
1
3
Editing: Basic Operation
Select an item
Exit the settings
Edit the values
2
4
3
Editing on the GT-100 is extremely simple; the procedure is always the same. Please take
a moment to learn the basic operations.
Use
to select an item shown in the left
display .
Press
.
Use
to edit the values
shown in the right display .
Effect
Here you can edit the parameters of each effect.
System
Here you can make settings that apply to the
entire GT-100, such as output settings and
phrase loop settings.
EZ (Easy) Tone
Here you can create the desired tone simply by
choosing a musical style and the type of song you
have in mind. You can also customize the amp and
overdrive/distortion settings in an intuitive way.
Control/Expression
Here you can assign the desired functions to the
[ACCEL/CTL] pedal, [EXP] pedal, and external
pedals.
Turn the knobs
to edit the
values.
If page tabs are shown in the screen, you can use the
[PAGE] buttons to move between tabs.
The screen shown here is an example of when you’ve pressed
the [EFFECT] button.
You’ll be returned to the Play screen.
NOTE
The settings you’ve edited will be lost when you switch patches. If you want to keep the edited settings, you must save them as a user patch.
Next Page
Turn knob [4] to select the
desired item (the cursor will
move).
page 14