Boss Audio Systems GT-100 - Manual (Page 31)

Saving a Tone
31
Q
uick G
uide
O
ver
vie
w
O
utputting S
ound
Eff
ec
ts
Sa
ving
Pedal S
ettings
Sy
st
em
MIDI/USB
A
ppendic
es
3.
Turn knob [5] to select the user patch that you want to
initialize .
* If you decide to cancel without initializing, press the [EXIT]
button. You’ll be returned to the Play screen.
4.
Press the [WRITE] button once again .
The patch will be initialized.
Storing Settings by Effect (Quick
Setting Write)
In addition to storing settings in the form of patches, you can also
store settings for individual effects.
Since you can use such stored settings in other patches, just like
with the Preset Quick Setting, storing effects settings you like
ahead of time User Quick Setting is a convenient way to create new
patches.
1.
Press the [WRITE] button .
2.
Use knob [4] to select the “QUICK SETTING WRITE” screen .
3.
Turn knob [5] to select the effect whose settings you want
to store .
Effects that can be stored in memory
Each PREAMP channel
OD/DS
DELAY
CHORUS
REVERB
COMP
EQ
The PEDAL FX’s WAH and PEDAL BEND
SEND/RETURN
DIVIDER
Each FX1/FX2 effect
ASSIGN 1–8
4.
Turn knob [6] to select the write destination (U01 – U10) .
Assigning a name
To edit the patch name, PAGE [ ][ ] buttons to move the cursor
and use knob [8] to change the character.
Controller Operation
Knob [7]
Switches between lowercase/uppercase
characters
Knob [8] Changes the character
PAGE [ ][ ] button Moves the cursor
[EZ TONE] button Deletes one character
[CTL/EXP] button Inserts one character
* If you decide to cancel without writing, press the [EXIT] button.
You’ll be returned to the Play screen.
5.
Press the [WRITE] button once again .
The Quick Setting will be written.
Copying or Swapping PREAMP
Settings Between Channels
The PREAMP settings can be copied or exchanged between
channels “A” and “B.”
1.
Press the [WRITE] button .
2.
Use knob [4] to select the “CH A/B UTILITY” screen .
3.
Use knob [5] to select the Copy or Exchange function .
Indication Explanation
PREAMP&SP CH .A g B
Copies the channel “A” PREAMP and SPEAKER
settings to channel “B.”
PREAMP&SP CH .B g A
Copies the channel “B” PREAMP and SPEAKER
settings to channel “A.”
PREAMP&SP CH .A g B
Exchanges the channel “A” PREAMP and
SPEAKER settings with those of channel “B.”
CHAIN CH .A fg B
Exchanges the channel “A” PREAMP and
SPEAKER settings with those of channel “B,”
and also exchanges the position of channel “A”
and channel “B”.
* If you decide to cancel without executing, press the [EXIT]
button. You’ll be returned to the Play screen.
4.
Press the [WRITE] button once again .
The exchange or copy operation will be executed.