Baracoda BRR-L - Manual (Page 14)

RoadRunners BRR-L Programming guide dec 2006
© Baracoda 2006 14/29
2.9.2/ Postrefix/postsuffix
You can add a postprefix and/or a postsuffix (strings of more than 32 characters will not be accepted) to every
barcode sent to the host device.
(Feature enabled for CPU firmware version ≥ 3.16)
There is no postprefix/postsuffix in default settings.
POST PREFIX on
POST PREFIX off (*)
POST SUFFIX on
POST SUFFIX off (*)
*= max length of the Suffix (Prefix) is 32 characters
Set postprefix
Set postsuffix
End of configuration
Read « Set postprefix (postsuffix) » label
START
Read intermediary label
Corresponding to the next character to set for the
postprefix/postsuffix(appendix A of this document)
Finished *?
Read « END of config » label
END
NO
YES
Programming procedure for “set postprefix (postsuffix)” option.