Baracoda BRR-L - Manual (Page 9)

RoadRunners BRR-L & BRR-LA Programming guide Nov 2007
© Baracoda 2007 9/29
2.5.2/ Batch mode
BATCH MODE
. Forces the
RoadRunners in Batch mode.
Erases all codes in memory.
When in batch mode, The BRR will wait the appropriate command in order to start uploading the barcodes: this
command can come
• from the Baracoda Manager
• from reading the “discharge” barcode here after
If this barcode is read when the reader is in batch mode and connected, the reader will automatically upload to
the host all the data in its memory. If not in batch mode and not connected, the BRR-L will ignore this barcode.
Æ
For CPU firmware versions <3.16, only the following upload barcode is available:
Upload batch data
When scanning this barcode, the BRR will send all barcodes in memory using the Baracoda header, with “no data
loss mode” OFF.
Æ
For CPU firmware versions ≥3.16, this upload barcode is available:
Upload batch data with no data loss mode
This upload process consists in switching temporarily the BRR into Real time with “no data loss mode” ON (all the
barcodes in memory will be sent using the no data loss protocol). Then the BRR switches back to batch mode
when all the barcodes are properly sent.