Baracoda BRR-L - Manual (Page 20)

RoadRunners BRR-L Programming guide dec 2006
© Baracoda 2006 20/29
The common request to replace ‘GS’ by the | (pipe) can be done through the scan of :
(Feature enabled for CPU firmware version > 3.00)
Define | as GS
Even if the “AIM ID transmit” is disabled, it is possible to enable the AIM ID transmission for EAN128.
(Feature enabled for CPU firmware version > 3.00)
Enable AIM ID transmission for EAN128
Disable AIM ID transmission for EAN128 (*)
3.11/ Interleaved 2 of 5 Settings
Interleaved 2 of 5 - not active
Interleaved 2 of 5 – active (*)
Interleaved 2 of 5 - check digit - not used (*)
Interleaved 2 of 5 - check digit - mod 10 - checked
and transmitted
Interleaved 2 of 5 - check digit - mod 10 - checked
but not transmitted
Interleaved 2 of 5 - barcode length - minimum length
= 6 (*)
Interleaved 2 of 5 – barcode length- any length
3.12/ MSI Code Settings
MSI Code - not active (*)
MSI Code – active
MSI Code - check digit - mod 10 - checked and
transmitted (*)