Baracoda BRR-L - Manual (Page 15)

RoadRunners BRR-L Programming guide dec 2006
© Baracoda 2006 15/29
3/ Decoder settings
3.1/ Symbology default settings
Sets the defaults decoder settings for all the symbologies
Set Decoder Default Settings
3.2/ Symbology Identifier
AIM Identifier will be transmitted at the beginning of the barcode. More information about the AIM Identifier available in
Appendix2
Symbology identifier - AIM - not transmitted (*)
Symbology identifier - AIM - transmitted
3.3/ Voting
Standard voting set is 2. This means that a barcode is considered read by the decoder if the same data is
decoded twice. Changing this parameters will enable a stronger security on the decoding of the barcode.
Voting = 2 (*)
Voting = 3
Voting = 4
3.4/ Disable All Symbologies
Even if all symbologies are disabled, the RoadRunners will always be able to read the programming barcodes of
this document.
Disable all symbologies
Enable all symbologies