Baracoda BRR-L - Manual (Page 16)

RoadRunners BRR-L Programming guide dec 2006
© Baracoda 2006 16/29
3.5/ Set decoder barcode length
You can set a fixed length for the barcode decoding. The scanner will only decode barcodes of this length.
(Feature enabled for CPU firmware version ≥ 3.16)
Set barcode length
END of config
3.6/ Codabar settings
Codabar - not active
Codabar – active (*)
Codabar - start/stop - not transmitted (*)
Codabar - start/stop - transmitted
Codabar - check digit (AIM recommendation) - not
used (*)
Read « Set barcode length » label
START
Read intermediary label
Corresponding to the next digit to set for the length (see
Appendix 1) (5 digits max)
Finished ? (1)
Read « END of config » label
END
NO
YES
Programming procedure for “set barcode length” option.