Changing over door hinges – Liebherr MKv 3910 User Manual
Page 13
Advertising
25
GB
1.
Unscrew the hinge bracket.
Important: The door mounting has
a spring mechanism enabling the
door to close by itself. The hinge
bracket turns to the left when the
screws are undone.
2.
Pull the door out at the bottom
and lift off.
3.
Transfer handle and plugs to the
opposite side of the door.
4.
Transfer pin on hinge bracket to the
opposite side.
5.
Transfer upper hinge components to
the opposite side.
6.
Transfer cover plate to the opposite
side.
7.
Mount door on hinge pin and close.
8.
Insert hinge bracket in lower door
mounting.
9.
Turn hinge bracket by 90° - spring
is compressed. Screw on hinge
bracket.
Changing over door hinges
Advertising