Bayer Breeze-2 - Manual (Page 15)


www.BayerDiabetes.com
Then insert the lancet fi rmly
until it comes to a full stop.
This will “cock” the device.
4. Twist off the lancet cap and
replace the endcap.
Push Out Test Strip
5. Your B
reeze
Meter uses
a special, easy-to-use “Pull
and Push” design.
Here’s how it works:
Hold the meter comfortably in
one hand. Firmly grasp the meter
handle with the other hand
(shown here). Now, just “Pull
and Push”—“Pull” the handle
out until it stops and “Push” it
back in until it stops again.
Helpful Hint:
There is no
need to turn the meter on—
just “Pull and Push.”