Blaupunkt SAN FRANCISCO CD72 - Manual (Page 10)

52
THEFT PROTECTION
Preparing a second KeyCard
A second KeyCard can be prepared as
an additional KeyCard. This means you
can create a “spare key”. You can ob-
tain KeyCards from your Blaupunkt
dealer.
If you want to prepare a second Key-
Card, please refer to the instructions in
the section entitled “Preparing a new
KeyCard / entering the master code”.
Note:
●
A maximum of two KeyCards can
be used with each device.
If you already have two KeyCards for
the unit and then prepare a third, you
will no longer be able to use the second
KeyCard with the unit.
Lost or damaged KeyCard
If all the unit’s KeyCards are damaged
or lost, you can prepare up to two new
KeyCards again.
You can purchase KeyCards from your
Blaupunkt dealer.
Before you can use the new KeyCards,
you will need the device’s master code,
which you can find printed on the car
radio passport. To prepare a new Key-
Card, please read the section entitled
“Preparing a new KeyCard”.
Keep the car radio passport and
the KeyCard in a safe place but nev-
er in the vehicle.
Preparing a new KeyCard / entering
the master code
If you no longer have a valid KeyCard
for your unit or you want to prepare a
second KeyCard:
➮
Insert a new KeyCard that the unit
is not yet “familiar” with.
➮
Close the control panel.
➮
Switch the unit off if it is not already
off.
➮
Simultaneously press and hold
down the TUNER button
<
and
the top left softkey
4
.
➮
Switch the unit on using button
1
.
“0000” appears in the display.
Enter the four-digit master code that is
printed on the car radio passport as fol-
lows:
➮
Enter each of the master code’s
numbers using the joystick
7
. To
do so, repeatedly press the joystick
up or down until the required
number appears in the display.
➮
You can move the input position by
pressing the joystick
7
to the left
or right.
➮
If the master code is displayed cor-
rectly, press the joystick OK button
7
.
The new KeyCard is accepted as soon
as the unit switches to playback mode
and “KEYCARD OK” appears briefly in
the display.