Blaupunkt SAN FRANCISCO CD72 - Manual (Page 28)

70
You must not hinder or assist the drive
as it draws in the CD.
The control panel closes automatically.
The CD menu appears and CD play-
back begins.
●
If a CD is already inserted in the
unit,
➮
press the SOURCE button
;
re-
peatedly until CD mode is dis-
played.
The CD menu appears and playback
begins from the point at which it was
last interrupted.
Removing the CD
➮
Press the button
6
.
The control panel opens out towards
you and the CD is ejected.
➮
Carefully remove the CD.
➮
Press the button
6
.
The control panel closes.
Selecting tracks
➮
Move the joystick
7
in one direc-
tion (up and right for the next track
or down and left for the previous
track) until the number of the re-
quired track appears in the display.
If you press the joystick
7
downwards
once or to the left once, the current track
will be played again from the beginning.
Fast searching (audible)
To fast search backwards or forwards,
➮
press and hold down the joystick
7
in one direction (up and right for
forwards or down and left for back-
wards) until fast searching begins.
The display shows the current playing
time during the search operation.
Random track play (MIX)
➮
Press the softkey
4
assigned to
the “MIX” display item.
“MIX ON” appears briefly in the display.
The next track that is played will be
picked at random.
Cancelling MIX
➮
Press the softkey
4
assigned to
the “MIX” display item again.
“MIX OFF” appears briefly in the dis-
play.
Repeating tracks (REPEAT)
➮
Press the softkey
4
assigned to
the “RPT” display item.
“REPEAT ON” appears briefly in the dis-
play. The track is repeated until you
deactivate RPT.
Cancelling REPEAT
➮
Press the softkey
4
assigned to
the “RPT” display item again.
“REPEAT OFF” appears briefly in the
display. Normal playback is then re-
sumed.
CD MODE