Blaupunkt SAN FRANCISCO CD72 - Manual (Page 11)

53
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Note:
●
If you entered the master code in-
correctly three times, you must wait
for one hour. During this waiting
period, “WAIT 1H” will appear in
the display and the device cannot
be operated. Do not switch the unit
off during this period. After the hour
has elapsed enter the correct mas-
ter code.
Looking after the KeyCard
Keeping the contacts free from dirt and
other particles will ensure that the Key-
Card functions properly. Avoid making
direct skin contact with the contacts.
If necessary, clean the KeyCard con-
tacts with a lint-free cloth and some al-
cohol.
Switching on/off
There are various ways of switching the
unit on/off.
Switching on/off using button
1
➮
To switch the unit on, press button
1
until you feel the latch open –
the button pushes out.
The device switches on.
➮
To switch the unit off, press button
1
until you feel it click into place.
The unit switches off.
Switching on/off using the
vehicle ignition
If the device is correctly connected to
the vehicle’s ignition and the unit was
not switched off using button
1
, it will
switch on/off simultaneously with the
ignition.
You can switch the unit on even if the
ignition is off.
➮
To do so, press button
1
until you
feel the latch open – the button
pushes out.
Note:
●
To protect the vehicle battery, the
unit will switch off automatically af-
ter one hour if the ignition is off.
SWITCHING ON/OFF THEFT PROTECTION