Blaupunkt SAN FRANCISCO CD72 - Manual (Page 23)

65
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Setting the sensitivity of station
seek tuning
You can choose whether the system
should only tune into stations with a
strong reception or whether it can also
tune into those with a weak reception.
➮
Press the TUNER button
<
in ra-
dio mode.
The radio functions menu appears in the
display.
➮
Press the NEXT button
3
.
➮
Press the softkey
4
assigned to
the “SENS” display item.
➮
Press the softkey
4
assigned to
the “FM” display item (if you want
to set the FM search sensitivity) or
the “AM” display item (if you want
to set the AM search sensitivity).
The display shows the currently set val-
ue for the search sensitivity. “SENS 6”
is the highest search sensitivity setting
and means the tuner can receive dis-
tant stations. “SENS 1” is the lowest
setting.
➮
Move the joystick
7
up/right or
down/left to adjust the search sen-
sitivity.
➮
Press the joystick OK
7
or the
MENU button
8
to close the
menu.
The settings are saved.
Storing stations (only in static
radio mode)
Storing stations manually
➮
Select the required FM memory
bank, i.e. FM1, FM2, FM3, FMT, or
one of the MW, LW or SW wave-
bands.
➮
Tune into the required station as
described in the section entitled
“Tuning into a station”.
➮
Press one of the six softkeys for
longer than two seconds to store
the station on that softkey.
Storing stations automatically
(Travelstore - only in static radio
mode)
You can automatically store the six sta-
tions with the strongest reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Note:
●
Any stations that were previously
stored in this memory bank are de-
leted in the process.
Starting the Travelstore function
➮
Press the TUNER button
<
in ra-
dio mode.
The radio functions menu appears in the
display.
➮
Press the softkey
4
assigned to
the “TS” display item.
RADIO MODE