Double-active calc system, Using the calc-clean function, After the calc-clean process – Philips Azur Dampfbügeleisen User Manual

Page 10: Storage

Advertising
background image

3

Regularly rinse the water tank with water. Empty the water tank after you have rinsed it.

Double-active Calc System

The Double-Active Calc System consists of an Anti-Calc tablet inside the water tank combined with

the Calc-Clean function.

1 The Anti-Calc tablet prevents scale from clogging the steam vents. This tablet is constantly active

and does not need to be replaced.

2 The Calc-Clean function removes the scale particles from the iron.

using the Calc-Clean function

Use the Calc-Clean function once every two weeks. If the water in your area is very hard (i.e. when

flakes come out of the soleplate during ironing), use the Calc-Clean function more frequently.

1

Fill the water tank to the maximum level.

Do not put vinegar or other descaling agents in the water tank.

2

Set the temperature dial to MAX (Fig. 17).

3

Put the plug in an earthed wall socket.

4

Unplug the iron when the temperature light goes out.

5

Hold the iron over the sink. Push the steam control to the Calc-Clean position and hold it.

Gently shake the iron to and fro (Fig. 18).

, Steam and boiling water come out of the soleplate. Impurities and flakes (if any) are flushed

out.

6

Release the steam control as soon as all the water in the tank has been used up.

Repeat the Calc-Clean process if the iron still contains a lot of impurities.

after the Calc-Clean process

1

Put the plug in the wall socket and let the iron heat up to let the soleplate dry.

2

Unplug the iron when it has reached the set ironing temperature.

3

Move the hot iron gently over a piece of used cloth to remove any water stains that may

have formed on the soleplate.

4

Let the iron cool down before you store it.

Storage

1

Set the steam control to position 0, unplug the iron and let it cool down.

2

Empty the water tank and store the iron on its heel on a stable surface. (Fig. 19)

3

Wind the mains cord and fix it with the cord binder.

heat-resistant protective cover (specific types only)

You can store the iron on the heat-resistant protective cover immediately after ironing. It is not

necessary to let the iron cool down first.
Do not use the heat-resistant protective cover during ironing.

1

Insert the tip of the soleplate into the heat-resistant protective cover (1) and then press

down the heel of the iron (2) (Fig. 20).

EnGlISh

10

Advertising
This manual is related to the following products: