Bryant LEGACY LINE 580J User Manual
Page 5
5
Table 1 – FACTORY--INSTALLED OPTIONS AND FIELD--INSTALLED ACCESSORIES
CATEGORY
ITEM
FACTORY
INSTALLED
OPTION
FIELD
INSTALLED
ACCESSORY
Cabinet
Thru---the---base electrical or gas---line connections
X
X
Coil Options
Cu/Cu indoor and/or outdoor coils
1
X
Pre---coated outdoor coils
1
X
Premium, E---coated outdoor coils
1
X
Humidity Control
Perfect Humidity Dehumidification System (3 --- 12.5T)
X
Condenser Protection
Condenser coil hail guard (louvered design)
X
X
Controls
Thermostats, temperature sensors, and subbases
X
RTU---MP open---protocol controller
X
Smoke detector (supply and/or return air)
X
Time Guard II compressor delay control circuit
X
Phase Monitor
X
Economizers
& Outdoor Air
Dampers
EconoMi$ert IV (for electro---mechanical controlled RTUs)
X
X
EconoMi$ert2 (for DDC controlled RTUs)
X
X
Motorized 2 position outdoor air damper
X
X
Manual outdoor air damper (25% and 50%)
X
Barometric relief
2
X
X
Power exhaust
X
Economizer Sensors
&
IAQ Devices
Single dry bulb temperature sensors
3
X
X
Differential dry bulb temperature sensors
3
X
Single enthalpy sensors
3
X
X
Differential enthalpy sensors
3
X
Wall or duct mounted CO
2
sensor
3
X
Unit mounted CO
2
sensor
3
X
Gas Heat
Propane conversion kit
X
Stainless steel heat exchanger
X
High altitude conversion kit
X
Flue Shield
X
Flue Discharge Deflector
X
Indoor Motor & Drive
Multiple motor and drive packages
X
Low Ambient
Control
Winter start kit
4
X
Motormaster head pressure controller
4
X
Power
Options
Convenience outlet (powered)
X
Convenience outlet (un---powered)
X
Non---fused disconnect
X
Roof Curbs
Roof curb 14---in (356mm)
X
Roof curb 24---in (610mm)
X
NOTES:
1. Novation coated coils only available with E---coat.
2. Included with economizer.
3. Sensors used to optimize economizer performance.
4. See application data for assistance.
580J