Philips SENSEO® Twist & Milk Kaffeepadmaschine - Manual (Page 12)

12
5 Press the on/off button 3. The on/off button
flashes slowly while the water heats up.
6
Make sure that the coffee strength you have
selected is regular coffee (cup symbol with
three bars).
7 Press the 2-cup button qq to brew two cups
of hot water.
8
When the water has heated up, the on/off
button lights up continuously and the coffee
machine starts operating.
9
Throw away the water in the cups. Now the
machine is ready for use again.
5.2 Flushing the machine after
a day of non-use
If you have not used the coffee machine for one
day, flush it to make sure that the boiler is filled
with fresh water.
To flush the machine, brew two cups of hot
water in the following way:
1
Fill the water reservoir with cold tap water
beyond the MIN level (1). Put the lid on it (2)
and put it the water reservoir back onto the
machine.
2 Put the 1-cup pod holder q or the 2-cup pod
holder qq in the machine without pods.
3
Close the lid and lock the lever.
4
Put two cups or a large mug under the coffee
spout to collect the water.
4222_200_0566_3_DFU-Redesign_A5_v2.indd 12 6/18/12 4:54 PM