Philips SENSEO® Twist & Milk Kaffeepadmaschine - Manual (Page 7)

7
5 Tilt the water reservoir and place the bottom
back onto the machine (1). Then press the top
of the water reservoir towards the machine (2).
6 Remove the drip tray.
7
Place a bowl with a capacity of at least 1.5
litres under the coffee spout.
8 Make sure a pod holder, without pod or pods,
is in place.
1.5L
C Caution:
Never flush the machine or let it brew coffee
when the spout is not in place.
2
Tilt the top of the water reservoir backwards
(1) and lift the water reservoir off the
machine (2).
3 Fill the water reservoir to the top with cold
tap water.
4
Place the lid on the water reservoir before
you put the water reservoir back onto the
machine.
ENGLISH
4222_200_0566_3_DFU-Redesign_A5_v2.indd 7 6/18/12 4:54 PM