Black Box COMPACT T1 MT850A - Manual (Page 197)

Compact T1 - Release 6.1 5-113
CLI Commands
set
set (router) mgcp callagent secondary port
Use the set (router) mgcp callagent port command for configuring the port number for
the secondary call agent that will be tried if the primary call agent does not reply to the
notifications. This command takes effect after the card has been reset.
Syntax: set {cmg_card-addr} mgcp callagent secondary port
{port-num}
Example: set 1 mgcp callagent secondary port 5000
The example will set the port number to be used by the MGCP to access the
secondary call agent to 5000 for the CMG card in slot 1.
{cmg_card-addr}
The slot number (1-6) that contains the CMG Router card.
{port-num}
Default port number for MGCP on the secondary call agent. Range from 0 to 65535, with
a default of 2727.
set (router) mgcp default
Use the set (router) mgcp default command to set all configurable MGCP options to their
default values. This command applies to the CMG Router card only.
Syntax: set {cmg_card-addr} mgcp default
Example: set 1 mgcp default
The example will set the MGCP to default values CMG card in slot 1.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.