Black Box COMPACT T1 MT850A - Manual (Page 295)

Compact T1 - Release 6.1 5-211
CLI Commands
show
show (ds1)
The show (ds1) command displays settings for DS1s.
Syntax: show {ds1-addr}
Example: show a:1
In the following example, the query show a:1 has returned the following DS1
settings for slot A (the controller card), port 1.
> show a:1
SLOT A:
Settings for DS1 1:
Circuit ID: DS1# A:1
Up/Down: DOWN
Framing: ESF
Line Coding: B8ZS
Line Build Out: DSX-1 EQUALIZATION FOR 0-133 ft.(CSU 0dB)
Loop Code Detection: ON
Loopback: OFF
FDL Type: None
Performance Threshold Settings 15 min. 1 day
--------- ----------
unavailable seconds: 0 0
severely errored seconds: 0 0
errored seconds: 0 0
sev. errored frame seconds: 0 0
line errored seconds: 0 0
controlled slip seconds: 0 0
bursty errored seconds: 0 0
degraded minutes: 0 0
total linecode violations: 0 0
total pathcode violations: 0 0
{ds1-addr}
In the form {slot:port}
slot A for the controller card, or 1 - 6 for service cards.
port Port number or range.