Technical specifications, Controller software required, Product includes – Black Box COMPACT T1 MT850A User Manual
Page 408: Management, Network interface, Technical specifications -4
9-4
Compact T1 - Release 6.1
ISDN BRI Card
Technical Specifications
Technical Specifications
Controller Software Required
T1 Controller
l
Release 1.2.2 or higher is required
Product Includes
l
Configurable as Line Unit Line Terminal (LULT) or Line Unit Network Terminal
(LUNT)
l
Works with all standard Carrier Serving Area (CSA) loops - maximum 18,000 ft.
range (#26 AWG copper)
l
Line coding: 2
l
Line Rate: 160 Kbps (80 kbaud)
l
Front-panel multi-function LEDs provide out-of-Service, LOS/Self-test fail,
ES/SES detected, Sync, Loopback, and Normal indications
l
Interoperable with other standards-based ISDN BRI equipment
l
B1, B2, and 2B+D payload loopbacks supported
l
Maximum bridged tap length is 2.5 kft. (762 m)
l
Rear-accessed U-interface connections
Management
l
Standard ISDN SNMP MIB supported
Network Interface
l
3 DS0 mode: Uses 3 contiguous DSO channels per ISDN BRI channel on T1