Brocade Communications Systems Brocade EZSwitchSetup 5100 - Manual (Page 19)

EZSwitchSetup Administrator’s Guide 7
53-1002157-01
Installing and running the EZSwitchSetup wizard
2
FIGURE 4 EZSwitchSetup introduction screen
Connecting cables
1. Choose the method of connecting to your LAN.
You have the choice of using a serial connection or an Ethernet connection to your LAN to set
the IP address for the switch. The Ethernet connection is generally more convenient and
preferred. Use the serial connection if it is not possible or not convenient to connect the host
on the same subnet as the switch.
2. Click Next.
The Connect Cables screen is displayed ( Figure 5 ).