Brocade Communications Systems Brocade EZSwitchSetup 5100 - Manual (Page 20)

8 EZSwitchSetup Administrator’s Guide
53-1002157-01
Installing and running the EZSwitchSetup wizard
2
FIGURE 5 Connect Cables screen (Ethernet version, without serial cable)
Figure 6 on page 9 shows the cables connecting to the Brocade Fibre Channel switch, setup
computer, Ethernet hub or switch, and network.
NOTE
Not all switches have their serial and Ethernet connectors in the same place as in Figure 6 .
Refer to the hardware documentation to determine the correct placement of the serial and
Ethernet connections.