Configuring the switch, Figure 12 – Brocade Communications Systems Brocade EZSwitchSetup 5100 User Manual
Page 28
Advertising
16
EZSwitchSetup Administrator’s Guide
53-1002157-01
Configuring the switch
2
Configuring the switch
The configuration wizard steps you through the process of changing your administrative password
and zoning. You begin at the Welcome to Switch Configuration screen (
FIGURE 12
Switch configuration welcome screen
1. Click Next to begin.
The Set Parameters screen is displayed.
FIGURE 13
EZSwitchSetup Setup Parameters
Advertising
This manual is related to the following products: