Brocade Communications Systems Brocade EZSwitchSetup 5100 - Manual (Page 26)

14 EZSwitchSetup Administrator’s Guide
53-1002157-01
Installing and running the EZSwitchSetup wizard
2
• Exit EZSwitchSetup
Select this option if you want to use EZSwitchSetup as an IP configuration tool, but do not
want to use EZSwitchSetup Manager as a management tool for the switch.
FIGURE 11 Continue Configuration screen
4. Click Continue.
One of the following happens, depending on the continuation option you selected:
• If you selected Continue setting up your target switch with EZManager, a dialog box
displays warning you that EZSwitchSetup supports only single switch fabrics. Click OK to
start the EZSwitchSetup Manager.
A browser window opens and loads, and the Switch Configuration Welcome screen is
displayed (
Figure 12 ). This may take a few minutes.
If the configuration wizard does not launch, you must launch it manually by specifying the
URL in a browser:
http://<switch-ip>
If the switch discovery fails, see “Switch discovery failure” on page 15 for details on how to
recover your switch.
• If you selected Discover another switch on the same subnet for IP assignment only, the
Discover Switch screen displays (
Figure 7 on page 10). Go to “Discovering the switch” on
page 10 and provide the WWN for the next switch.
• If you selected Exit EZSwitchSetup, the wizard closes.