Configure the ab_eth/ip driver – Rockwell Automation 1734-AENT POINT I/O EtherNet/IP Adapter Module User Manual
Page 102
Advertising
Publication 1734-UM011D-EN-P - May 2011
88 Configure the RSLinx Ethernet Communication Driver
Configure the AB_ETH/IP
Driver
To configure the AB_ETH/IP Ethernet communication driver, perform the
following steps.
1. Start RSLinx software.
2. From the Communications menu, select Configure Drivers.
3. Click the arrow to the right of the Available Driver Types box.
The Available Driver Types list appears.
4. Select EtherNet/IP Devices and click Add/New.
The Configure driver dialog opens.
Advertising