Rockwell Automation 1734-AENT POINT I/O EtherNet/IP Adapter Module User Manual
Page 73
Advertising
Publication 1734-UM011D-EN-P - May 2011
Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software 57
The New Module dialog opens.
4. From the New Module dialog, complete the following.
• Enter a value for Name.
• Enter a value for Slot.
• Click Change.
The Module Definition dialog opens.
5. From the Connection tab, select Rack Optimization.
6. Click OK.
The New Module dialog opens.
7. From the New Module dialog, click the Connection tab.
Advertising