Rockwell Automation 1734-AENT POINT I/O EtherNet/IP Adapter Module - Manual (Page 70)

Publication 1734-UM011D-EN-P - May 2011
54 Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software
2. Expand Digital to see the list of digital modules.
3. Select the 1734-OW2 relay output module from the list, and click OK.
The New Module dialog opens.
4. Enter values for Name and Slot. Note that we used the following values.
5. Choose Connection.
Name POINT_Relay_Output
Slot 1