Rockwell Automation 1734-AENT POINT I/O EtherNet/IP Adapter Module - Manual (Page 152)

Publication 1734-UM011D-EN-P - May 2011
138 Quick Start
Now you can put your controller in Run mode, and the connection
should be successful.
Configure an Ethernet
Driver in RSLinx Software
To configure an Ethernet driver in RSLinx software, launch RSLinx software.
Launch RSLinx Software
Launching the RSLinx software enables you to configure the driver you use to
communicate with the ControlLogix controller.
1. Double-click the RSLinx icon on the Desktop to launch RSLinx
software.
2. Click the RSWho icon .
IMPORTANT
The information found in the Controller Tag Reference
section of this user manual is also available in the
RSLogix 5000 online help file. Use the Help file search
function under the 1734 catalog number that you are
configuring and select the Module Defined Data Types
option. You see all of the configurable parameters and
associated values.