Rockwell Automation 1734-AENT POINT I/O EtherNet/IP Adapter Module - Manual (Page 154)

Publication 1734-UM011D-EN-P - May 2011
140 Quick Start
Add the AB_ETHIP-1 (EtherNet/IP) Driver
1. From the Communications menu, choose Configure Drivers.
The Configure Drivers dialog appears.
2. From the Available Driver Types pull-down menu, choose EtherNet/IP
Driver.
3. Click the Add New button.
4. Click OK to accept the default name (AB_ETHIP-1).
Be sure that the radio button for Browse Local Subnet is enabled.
5. Click OK.
6. Verify that the driver you just configured is running, and click the Close
button to exit the Configure Drivers dialog.
7. Click the X in the upper right corner of the RSWho dialog to stop
RSWho.
8. Click the minimize icon in the upper right corner of the RSLinx
dialog to minimize RSLinx software.