Rockwell Automation 1734-AENT POINT I/O EtherNet/IP Adapter Module - Manual (Page 55)

Publication 1734-UM011D-EN-P - May 2011
Configure the Adapter for Direct Connection in RSLogix 5000 Software 39
Create the Ladder Program
Next create the example ladder program to test the I/O.
1. Double-click Main Routine under the Main Program folder.
2. Enter the following ladder program using the tags previously created.
3. Save the program.
Download the Program to
the Controller
Follow this procedure to download the program you just saved to the
ControlLogix controller.