Rockwell Automation 1734-AENT POINT I/O EtherNet/IP Adapter Module - Manual (Page 93)

Publication 1734-UM011D-EN-P - May 2011
Adapter Web Pages 77
2. From the Configuration page, click one of these.
• Identity
• Network
• Services
The Enter Network Password dialog opens.
3. From the user name and password dialog, enter values, noting the
following.
• The values for user name and password are case sensitive.
• The default user name is admin.
• The default password is password.
4. From the user name and password dialog, click OK to log in, noting that
after you log in you can go to any of the Configuration pages without
logging in again.
5. Refer to the section of this manual that describes which of these you
clicked: Identity, Network, Services.
Use the Identity Page
To use the Identify page to make entries for the host name, module
description, module location, and chassis size, use this procedure.
1. From the Web page, click Identity from the tab at the top of the page or
panel on the left.