Rockwell Automation 1734-AENT POINT I/O EtherNet/IP Adapter Module - Manual (Page 94)

Publication 1734-UM011D-EN-P - May 2011
78 Adapter Web Pages
You see the Identity page.
2. From the Identity tab, complete entries for the following, noting that the
description and location help you identify where modules are in the
facility.
• Host Name – the name a Domain Name Server uses to resolve this
adapter’s IP address
• Module Description
• Module Location
• Chassis Size – the value that shows the number of POINT I/O
mdoules plus the adapter. This value must match the number of I/O
modules plus one for the adapter before any I/O connections are
allowed.
3. Click Apply Changes to save the modified values.
Use the Network Configuration Page
To use the Network Configuration page to make entries for enabling or
disabling DHCP and setting TCP/IP parameters and Ethernet link operation,
follow this procedure.
1. From the Web page, click the Network tab at the top of the page or
panel on the left.