Brother BE-1201B-AC-PC - Manual (Page 242)

13-2 BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 13 Connection and Installation of Optional Equipment
1. Attaching Bobbin Winder
! Mounting method
W1636
W1637
3. Attach bobbin winder guide bracket [7] to the cotton stand [8] with screws.
4. MoAttach bobbin winder assembly [10] equipped with bobbin winder plate [9] using two screws,
washers, and nuts. Fit the connector [12] on the bobbin winder side to nylon connector [11].
[6]
[2]
[5]
[1]
1 Loosen four screws [1] and remove table (L)
[2].
2 Attach spool shaft B [5] to the removed table
(L) [2] with washer [3] and nut [4]. Mount
table (L) [2] on the machine with four
screws. Fit spool mat A [6] to spool shaft B
[5] .
[3]
[4]
[9]
[8]
[7]
[12]
[11]
[10]