Brother BE-1201B-AC-PC - Manual (Page 96)

5-10 BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 5 Editing Embroidery Data
Change of display color
!
When the color of the embroidering sequence is changed, the color displayed on the screen is
changed. When ending embroidering or reading other data, the confirmation screen for saving the
setting appears.
! A display color can be selected from among the following four items.
Basic color which can be selected screen on the
"Color selection" Refer to steps 1 and 2.
Color sample supplied by a manufacturer Refer to steps 1 and 3.
Color sample created by a user Refer to steps 1 and 3.
Adjustment of an intermediate color from the color
sample supplied by a manufacturer or naming and
registration of a newly created color Refer to steps 1 to 7.
! The following screen is displayed when colors to be displayed are set to 256 in [Display Properties]
and the color sample supplied by a manufacturer cannot be selected or an intermediate color
cannot be created.
W1017Q
1. Double click the desired embroidering sequence to change the color.
W0699Q