Fork mounted hook, Fork mounted hook -30 – SkyTrak 10054 Operation Manual User Manual
Page 102
Section 5 - Attachments
5-30
31200352
Fork Mounted Hook
Use Appropriate Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-8.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
The boom joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt joystick (2) controls fork tilt.
• Move joystick back to tilt up.
• Move joystick forward to tilt down.
Installation Procedure:
• Ensure carriage is properly installed. Refer to “Attachment Installation” on
• Secure the fork mounted hook to the forks by sliding the fork mounted hook onto
the parent forks and install the retaining pin behind the vertical shank of the fork.
OY0640
OH4021
2
1