SkyTrak 10054 Operation Manual - Manual (Page 140)

Section 7 - Lubrication and Maintenance
7-18 31200352
Hydraulic Oil
A. Hydraulic Oil Level Check
1. Be sure all cylinders are fully retracted and machine is level.
2. Perform “Shut-Down Procedure” on page 4-4.
3. Check level of hydraulic oil at the sight gauge (6) on the hydraulic tank (5). The
oil level should be visible in the gauge window.
4. If hydraulic oil is low remove tank cover.
5. Remove oil fill cap (7) from filler neck. Add hydraulic fluid to bring oil up to the
upper mark on the sight gauge.
6. Replace hydraulic oil fill cap.
7. Replace and secure tank cover.
10
OW0970
OW1030
OH4231
6
5
7