2 boom/outrigger interlock (10054), 2 boom/outrigger interlock (10054) -2 – SkyTrak 10054 Operation Manual User Manual

Page 150

Advertising
background image

Section 8 - Additional Checks

8-2

31200352

8.2

BOOM/OUTRIGGER INTERLOCK (10054)

A. Boom/Outrigger Interlock System Test

Boom/Outrigger Interlock system operates in two modes. In extend interlock mode,
with outriggers raised, a sensor in the boom will stop boom from extending past a
point between the “E” and “F” extension indicators. In outrigger interlock mode, with
outriggers lowered, boom will extend fully and Stabil-Trak indicator will illuminate. To
check the sensor and indicator, perform the following:

1. Test Boom/Outrigger Interlock system on a level surface and boom horizontal,

no load.

2. Shift transmission to neutral (6) and engage park brake (3).

3. Raise outriggers (9).

4. Extend boom until it stops. Boom will stop at a point (8) between the

“E” and “F” extension indicators.

5. Retract boom.

6. Lower outriggers (10) on firm terrain.

7. Extend boom (7) until it stops. Boom will fully extend and Stabil-Trak

indicator (4) will illuminate.

10

OW0970

OH4381

6

3

4

10

7

8

9

Advertising
This manual is related to the following products: