Apple Newton Connection Utilities (for Macintosh) - Manual (Page 15)

The next time you establish a connection between your Newton device and
your computer, a prompt appears on your Newton device asking you to enter
your desktop connection password. The password helps prevent unauthorized
users from accessing your computer or Newton device, either directly or via
an AppleTalk network.
If you forget your password, you can enter a new one by clicking Set
Password in the Preferences dialog box.
Note: The password you enter for the Newton Connections Utilities is not
the same as the Personal Identification Number (PIN) you enter on your
Newton device.
Setting up for Auto Dock
If you’re using the Newton 2.1 operating system, you can set up the Newton
Connection Utilities to automatically back up or synchronize your Newton
device when you tap the Auto Dock button. (Your Newton device must be
connected to your computer.)
Note: The automatic backup and synchronize feature (Auto Dock) works only
on Newton devices using the Newton 2.1 operating system.
To set up Auto Dock, you need to
m Prepare your computer for Auto Docking.
m Set up your Newton device for Auto Docking.
To prepare your computer for Auto Docking, follow these steps:
15 Getting Started