Buhler 2895 - Manual (Page 15)

bühler
Allied Front-End Loader
Minimize turning angle and length of run
Carry the load no
between pile and trailer to increase loading
efficiency. Also, place load evenly or
centered in the attachment.
WARNING
r to highe than necessary clear the terrain.
Turn and brake slowly. Always be sure that
loading area is level and on solid ground. Do
not raise loader higher then required while
dumping. Immediately lower the loader to
ground if the tractor becomes unstable.
Leave material, which drifts over the bucket
ackfilling or Scraping:
For forward back filling, approach pile with a
ling rod for a guide to
o not use bucket in dumped position for
sides for final cleanup.
B
level bucket. Utilize the float position to
minimize bucket cutting edge wear. Leave
dirt in bucket.
Dumping on each pass
reduces efficiency.
NOTE:
Use leve
ensure bucket is level.
D
forward grading. This will only impose
severe shock loading on the bucket cylinders
and it is difficult to maintain a level grade.
- 13 - P4110